feat: citadel boots in new config

This commit is contained in:
truxnell 2024-03-25 13:56:47 +11:00
parent 32e6a70928
commit e5311a77b4
5 changed files with 121 additions and 136 deletions

View file

@ -102,6 +102,14 @@
"citadel" = mkNixosConfig {
hostname = "citadel";
system = "x86_64-linux";
hardwareModules = [
./nixos/profiles/hw-gaming-desktop.nix
];
profileModules = [
./nixos/profiles/role-worstation.nix
];
};
"dns01" = mkNixosConfig {

View file

@ -7,139 +7,38 @@
, ...
}: {
imports = [
# Host-specific
./hardware-configuration.nix
# Common imports
../common/nixos
../common/nixos/users/truxnell
../common/optional/fish.nix
../common/optional/monitoring.nix
../common/optional/reboot-required.nix
../common/optional/gnome.nix
../common/optional/editors/vscode
../common/optional/firefox.nix
../common/optional/sops-nix.nix
];
config = {
mySystem = {
services.openssh.enable = true;
security.wheelNeedsSudoPassword = false;
};
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.binfmt.emulatedSystems = [ "aarch64-linux" ]; # Enabled for raspi4 compilation
networking.hostName = "citadel"; # Define your hostname.
networking.hostName = "citadel"; # Define your hostname.
fileSystems."/" =
{
device = "/dev/disk/by-label/701fc943-ede7-41ed-8a53-3cc38fc68fe5";
fsType = "ext4";
};
fileSystems."/boot" =
{
device = "/dev/disk/by-uuid/C634-F571";
fsType = "vfat";
};
swapDevices = [ ];
# Enable OpenGL
hardware.opengl = {
enable = true;
driSupport = true;
driSupport32Bit = true;
};
# Load nvidia driver for Xorg and Wayland
services.xserver.videoDrivers = ["nvidia"]; # or "nvidiaLegacy470 etc.
hardware.nvidia = {
# Modesetting is required.
modesetting.enable = true;
# Nvidia power management. Experimental, and can cause sleep/suspend to fail.
# Enable this if you have graphical corruption issues or application crashes after waking
# up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead
# of just the bare essentials.
powerManagement.enable = false;
# Fine-grained power management. Turns off GPU when not in use.
# Experimental and only works on modern Nvidia GPUs (Turing or newer).
powerManagement.finegrained = false;
# Use the NVidia open source kernel module (not to be confused with the
# independent third-party "nouveau" open source driver).
# Support is limited to the Turing and later architectures. Full list of
# supported GPUs is at:
# https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus
# Only available from driver 515.43.04+
# Currently alpha-quality/buggy, so false is currently the recommended setting.
open = false;
# Enable the Nvidia settings menu,
# accessible via `nvidia-settings`.
nvidiaSettings = true;
# Optionally, you may need to select the appropriate driver version for your specific GPU.
package = config.boot.kernelPackages.nvidiaPackages.stable;
};
# Pick only one of the below networking options.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
# networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
# Configure network proxy if necessary
# networking.proxy.default = "http://user:password@proxy:port/";
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
# Select internationalisation properties.
# i18n.defaultLocale = "en_US.UTF-8";
# console = {
# font = "Lat2-Terminus16";
# keyMap = "us";
# useXkbConfig = true; # use xkb.options in tty.
# };
# Enable the X11 windowing system.
# services.xserver.enable = true;
# Configure keymap in X11
# services.xserver.xkb.layout = "us";
# services.xserver.xkb.options = "eurosign:e,caps:escape";
# Enable CUPS to print documents.
# services.printing.enable = true;
# Enable sound.
# sound.enable = true;
# hardware.pulseaudio.enable = true;
# Enable touchpad support (enabled default in most desktopManager).
# services.xserver.libinput.enable = true;
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = {
# enable = true;
# enableSSHSupport = true;
# };
# List services that you want to enable:
# Open ports in the firewall.
# networking.firewall.allowedTCPPorts = [ ... ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
# networking.firewall.enable = false;
# Copy the NixOS configuration file and link it from the resulting system
# (/run/current-system/configuration.nix). This is useful in case you
# accidentally delete configuration.nix.
# system.copySystemConfiguration = true;
# This option defines the first version of NixOS you have installed on this particular machine,
# and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
#
# Most users should NEVER change this value after the initial install, for any reason,
# even if you've upgraded your system to a new NixOS release.
#
# This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
# so changing it will NOT upgrade your system.
#
# This value being lower than the current NixOS release does NOT mean your system is
# out of date, out of support, or vulnerable.
#
# Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
# and migrated your data accordingly.
#
# For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
system.stateVersion = "23.11"; # Did you read the comment?
}

View file

@ -4,22 +4,17 @@
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/installer/scan/not-detected.nix")
];
boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
boot.initrd.kernelModules = [ ];
boot.kernelModules = [ "kvm-amd" ];
boot.extraModulePackages = [ ];
fileSystems."/" =
{ device = "/dev/disk/by-uuid/701fc943-ede7-41ed-8a53-3cc38fc68fe5";
{
device = "/dev/disk/by-uuid/701fc943-ede7-41ed-8a53-3cc38fc68fe5";
fsType = "ext4";
};
fileSystems."/boot" =
{ device = "/dev/disk/by-uuid/C634-F571";
{
device = "/dev/disk/by-uuid/C634-F571";
fsType = "vfat";
};
@ -33,6 +28,5 @@
# networking.interfaces.enp12s0.useDHCP = lib.mkDefault true;
# networking.interfaces.wlp13s0.useDHCP = lib.mkDefault true;
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
}

View file

@ -8,18 +8,38 @@
# GNOME plz
services.xserver = {
enable = true;
desktopManager.gnome.enable = true;
displayManager = {
gdm.enable = true;
defaultSession = "gnome"; # TODO move to config overlay
autoLogin.user = "truxnell"; # TODO move to config overlay
displayManager =
{
gdm.enable = true;
defaultSession = "gnome"; # TODO move to config overlay
autoLogin.enable = true;
autoLogin.user = "truxnell"; # TODO move to config overlay
};
desktopManager = {
# GNOME
gnome.enable = true;
};
layout = "us"; # `localctl` will give you
};
# TODO remove this when possible
# workaround for GNOME autologin
# https://github.com/NixOS/nixpkgs/issues/103746#issuecomment-945091229
systemd.services."getty@tty1".enable = false;
systemd.services."autovt@tty1".enable = false;
# TODO tidy this
# port forward for GNOME when using RDP***REMOVED***
networking.firewall.allowedTCPPorts = [
3389
];
# And dconf
programs.dconf.enable = true;
# https://github.com/NixOS/nixpkgs/issues/114514
# dconf write /org/gnome/mutter/experimental-features "['scale-monitor-framebuffer']" TODO hack for GNOME 45

View file

@ -0,0 +1,64 @@
{ config, lib, pkgs, imports, boot, ... }:
with lib;
{
boot = {
initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
kernelModules = [ "kvm-amd" ];
extraModulePackages = [ ];
loader = {
systemd-boot.enable = true;
efi.canTouchEfiVariables = true;
# why not ensure we can memtest workstatons easily?
grub.memtest86.enable = true;
};
};
# set xserver videodrivers for NVIDIA 4080 gpu
services.xserver.videoDrivers = [ "nvidia" ];
# ref: https://nixos.wiki/wiki/Nvidia
# Enable OpenGL
hardware.opengl = {
enable = true;
driSupport = true;
driSupport32Bit = true;
};
hardware.nvidia = {
# Modesetting is required.
modesetting.enable = true;
# Nvidia power management. Experimental, and can cause sleep/suspend to fail.
# Enable this if you have graphical corruption issues or application crashes after waking
# up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead
# of just the bare essentials.
powerManagement.enable = false;
# Fine-grained power management. Turns off GPU when not in use.
# Experimental and only works on modern Nvidia GPUs (Turing or newer).
powerManagement.finegrained = false;
# Use the NVidia open source kernel module (not to be confused with the
# independent third-party "nouveau" open source driver).
# Support is limited to the Turing and later architectures. Full list of
# supported GPUs is at:
# https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus
# Only available from driver 515.43.04+
# Currently alpha-quality/buggy, so false is currently the recommended setting.
open = false;
# Enable the Nvidia settings menu,
# accessible via `nvidia-settings`.
nvidiaSettings = true;
# Optionally, you may need to select the appropriate driver version for your specific GPU.
package = config.boot.kernelPackages.nvidiaPackages.stable;
};
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
}