diff --git a/flake.nix b/flake.nix
index b017f5e..6ee9cc6 100644
--- a/flake.nix
+++ b/flake.nix
@@ -77,6 +77,14 @@
             ];
           };
 
+          dns02 = nixpkgs.lib.nixosSystem {
+            inherit specialArgs;
+            system = "aarch64-linux";
+            modules = defaultModules ++ [
+              ./nixos/hosts/dns02
+            ];
+          };
+
           # isoimage = nixpkgs.lib.nixosSystem {
           #   system = "x86_64-linux";
           #   inherit specialArgs;
diff --git a/nixos/hosts/dns01/default.nix b/nixos/hosts/dns01/default.nix
new file mode 100644
index 0000000..6b55b0a
--- /dev/null
+++ b/nixos/hosts/dns01/default.nix
@@ -0,0 +1,102 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+{ config
+, lib
+, pkgs
+, ...
+}: {
+  imports = [
+    # Host-specific
+    ./hardware-configuration.nix
+
+    # Common imports
+    ../common/nixos
+    ../common/nixos/users/truxnell
+    ../common/optional/fish.nix
+    ../common/optional/monitoring.nix
+    ../common/optional/reboot-required.nix
+    ../common/optional/sops-nix.nix
+
+    ../common/optional/dnscrypt-proxy2.nix
+    ../common/optional/cloudflare-dyndns.nix
+    ../common/optional/maddy.nix
+  ];
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "dns01"; # Define your hostname.
+
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # sound.enable = true;
+  # hardware.pulseaudio.enable = true;
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "23.11"; # Did you read the comment?
+}
diff --git a/nixos/hosts/dns01/hardware-configuration.nix b/nixos/hosts/dns01/hardware-configuration.nix
new file mode 100644
index 0000000..e2b253d
--- /dev/null
+++ b/nixos/hosts/dns01/hardware-configuration.nix
@@ -0,0 +1,32 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "usb_storage" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/44444444-4444-4444-8888-888888888888";
+      fsType = "ext4";
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.end0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlan0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "aarch64-linux";
+}
diff --git a/nixos/hosts/dns02/default.nix b/nixos/hosts/dns02/default.nix
new file mode 100644
index 0000000..6b55b0a
--- /dev/null
+++ b/nixos/hosts/dns02/default.nix
@@ -0,0 +1,102 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+{ config
+, lib
+, pkgs
+, ...
+}: {
+  imports = [
+    # Host-specific
+    ./hardware-configuration.nix
+
+    # Common imports
+    ../common/nixos
+    ../common/nixos/users/truxnell
+    ../common/optional/fish.nix
+    ../common/optional/monitoring.nix
+    ../common/optional/reboot-required.nix
+    ../common/optional/sops-nix.nix
+
+    ../common/optional/dnscrypt-proxy2.nix
+    ../common/optional/cloudflare-dyndns.nix
+    ../common/optional/maddy.nix
+  ];
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "dns01"; # Define your hostname.
+
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  # i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # sound.enable = true;
+  # hardware.pulseaudio.enable = true;
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "23.11"; # Did you read the comment?
+}
diff --git a/partition.sh b/partition.sh
new file mode 100644
index 0000000..70a130c
--- /dev/null
+++ b/partition.sh
@@ -0,0 +1,34 @@
+#!/usr/bin/env bash
+
+
+# Define variables
+drive="/dev/mmcblk1"  # Change this to the desired drive, e.g., "/dev/sdb"
+swap_size="100MB"   # Change this to the desired swap size
+
+# Confirmation prompt
+read -p "This script will partition and format $drive. Are you sure you want to proceed? (y/n): " choice
+if [ "$choice" != "y" ]; then
+    echo "Exiting script."
+    exit 1
+fi
+
+# Partitioning
+parted "${drive}" -- mklabel gpt
+parted "${drive}" -- mkpart root ext4 512MB -"$swap_size"
+parted "${drive}" -- mkpart swap linux-swap -"$swap_size" 100%
+parted "${drive}" -- mkpart ESP fat32 1MB 512MB
+parted "${drive}" -- set 3 esp on
+
+# Formatting
+mkfs.ext4 -L nixos "${drive}p1"
+mkswap -L swap "${drive}p2"
+mkfs.fat -F 32 -n boot "${drive}p3"
+
+# Mounting disks for installation
+mount /dev/disk/by-label/nixos /mnt
+mkdir -p /mnt/boot
+mount /dev/disk/by-label/boot /mnt/boot
+swapon "${drive}p2"
+
+# Generating default configuration
+nixos-generate-config --root /mnt